Florida State Licensed Mold Remediation Company
Florida’s humid climate creates ideal conditions for mold growth. Our licensed Orlando mold remediation team provides expert inspection, safe removal and prevention services backed by 37+ years of experience.
Trusted in Orlando
Mold is not just a cosmetic problem, it is a health hazard. Mold spores spread through your air every time the HVAC system runs, contaminating rooms far from the visible growth. In Orlando’s climate, where humidity stays high year-round and hurricane season brings regular flooding, mold is a constant threat, especially after any water damage event.
At Philip White Painting and Restoration LLC, our state-licensed mold remediation team uses professional containment, HEPA air filtration, EPA-registered antimicrobial treatments and complete post-remediation verification to remove mold safely and permanently. We do not just clean the surface – we eliminate the source.
Our mold remediation service follows the IICRC S520 standard for professional mold remediation – the industry protocol used by certified restoration companies. Every job includes containment, removal, treatment, air quality verification and a clearance inspection to confirm the mold is completely gone before we close the job.
We begin every job with a thorough mold inspection using moisture meters, thermal imaging cameras and air quality sampling. Mold often hides behind drywall, under flooring, inside HVAC ducts and in attic spaces invisible to the eye but detectable with professional equipment. We identify the full extent of mold growth and the moisture source causing it before any remediation begins.
Before any mold is disturbed, we establish professional containment around the affected area using plastic sheeting and negative air pressure. This prevents mold spores from spreading to clean areas of your property during removal. We run HEPA air scrubbers continuously throughout the job to filter spores from the air protecting your family and our team.
We remove all types of mold including black mold (Stachybotrys chartarum), green mold, white mold and other species common in Central Florida. All contaminated materials that cannot be safely cleaned drywall, insulation, wood framing are carefully removed and disposed of according to Florida EPA guidelines. Salvageable materials are treated with EPA-registered antimicrobial agents.
After removal, we apply EPA-registered antimicrobial treatments to all affected and adjacent surfaces to kill remaining mold spores and inhibit future growth. We also address the underlying moisture source whether it is a plumbing leak, roof issue, poor ventilation or humidity infiltration because mold always returns if the moisture problem is not fixed.
Once mold removal and treatment are complete, we repair all structural damage caused by mold replacing drywall, insulation, flooring, and ceiling materials. We also handle interior repainting of all affected areas. Having the same team handle remediation and repairs means faster completion and no coordination between separate contractors.
After remediation is complete, we conduct post-remediation air quality testing to verify that mold spore counts have returned to normal, safe levels. We provide you with a written clearance report documentation that the mold remediation was successful. This report is also useful for home sales, insurance claims and peace of mind.
Orlando’s climate means mold is not a seasonal problem it is a year-round threat. Philip White Painting and Restoration LLC responds fast to mold calls across Orlando and Central Florida. Our state-licensed team removes mold safely, fixes the moisture source and verifies the air quality before we close the job. Call (407) 860-5846 now the longer mold goes untreated, the more it spreads.
We have helped many homes and businesses in Orlando remove mold and stay safe. From small mold problems to large mold cleanup, our team delivers fast and reliable mold remediation every time.
We make the mold remediation process simple and stress-free. From fast response to full cleanup, our team works quickly to remove mold and protect your property.
Call us anytime for fast mold assistance. Our team responds quickly, assesses the issue & schedules prompt service to stop mold from spreading.
We inspect your property, identify mold growth, locate moisture sources and perform testing to determine the extent of contamination.
We contain affected areas, remove mold safely, and apply antimicrobial treatments to help prevent future growth.
After cleanup, we perform final testing, verify air quality and provide a clearance report confirming successful remediation.
Not sure if you have mold? A professional mold inspection is the only way to know for certain. Mold often grows in areas you cannot see behind walls, under flooring, inside HVAC ductwork and in attic spaces. Philip White Painting and Restoration LLC provides professional mold inspections for Orlando homeowners using thermal imaging cameras, moisture meters, and air quality sampling. We identify whether mold is present, what type it is, and how extensive the growth is giving you a clear picture before any remediation work begins.
Black mold (Stachybotrys chartarum) is one of the most feared mold types and for good reason. It produces mycotoxins, toxic compounds that can cause serious health effects including respiratory problems, chronic coughing, headaches, fatigue and in severe cases, neurological symptoms. Black mold thrives in Florida’s humid climate, especially in areas with water damage, poor ventilation or HVAC systems that have not been properly maintained. It typically appears as dark greenish-black growth on drywall, ceiling tiles, wood and other organic materials.
In Orlando, air conditioning runs almost year-round and HVAC systems are one of the most common sources of hidden mold growth. Mold growing inside AC units, evaporator coils and air ducts spreads spores throughout your entire home every time the system runs. You may not see any mold but still experience chronic allergies, musty odors from vents, or recurring respiratory symptoms. Philip White inspects HVAC systems and air ducts for mold growth as part of every mold remediation job. If mold is found in your ductwork, we provide complete cleaning, antimicrobial treatment and air quality verification.
Mold insurance coverage in Florida is complicated and often misunderstood. Most standard homeowners insurance policies cover mold remediation only when the mold was caused by a “sudden and accidental” covered event such as a burst pipe or roof leak. Mold caused by long-term humidity, neglected leaks, or flooding (without a separate flood policy) is typically not covered. Philip White Painting and Restoration LLC helps Orlando homeowners navigate the claim process. We document the mold damage and its cause, provide detailed remediation estimates formatted for insurance adjuster review, and communicate with your carrier on your behalf.
Mold spreads every hour it is left untreated. We respond to mold emergencies in Orlando around the clock day, night, weekends and holidays. Call us and a state-licensed mold remediation specialist is dispatched to your property as quickly as possible.
Florida law requires mold remediation by a licensed contractor. Philip White Painting and Restoration LLC is fully licensed, ensuring safe, legal and properly documented mold removal services.
Philip White has proudly served Orlando homeowners and businesses since 1989. With over 37 years of experience. We have successfully handled mold issues in homes, condos, rental properties and commercial buildings throughout Central Florida.
Our team follows IICRC S520 mold remediation standards the industry gold standard for professional mold work. We are BBB Accredited with an A+ rating and fully licensed and insured in Florida. You get certified, accountable professionals who stand behind their work.
Philip White Painting and Restoration LLC provides state-licensed mold remediation for homes and businesses throughout Orlando and Central Florida. Our team responds fast the sooner we arrive, the more of your property we can save and the lower your remediation cost.
Call us at (407) 860-5846 to check if we serve your area. Our team is ready to help with fast and reliable mold remediation services.
Mold remediation costs in Orlando typically range from $500 to $1,500 for small localized mold (under 10 square feet) to $3,000 to $10,000 or more for large-scale mold affecting multiple rooms, HVAC systems, or structural materials. Factors include: the size of the affected area, the type of mold, whether materials need to be removed and replaced, and how accessible the mold is. The longer mold is left untreated, the larger and more expensive the remediation becomes. We provide a free, no-obligation estimate. If your mold was caused by a covered water damage event, your homeowners insurance may cover a significant portion of the cost.
Most residential mold remediation jobs in Orlando take 1 to 5 days depending on the extent of the mold growth. Small localized jobs (bathroom mold, small wall section) can often be completed in 1 to 2 days. Larger jobs involving multiple rooms, HVAC systems, or structural materials take longer. We provide a clear timeline after our initial inspection and keep you updated throughout the process.
Yes. Florida law (Florida Statute 468.84) requires that mold remediation on properties above 10 square feet be performed by a licensed mold remediation contractor. Philip White Painting and Restoration LLC holds the required Florida mold remediation license. Hiring an unlicensed contractor for mold work is illegal in Florida and may void your insurance coverage. Always ask for a contractor’s Florida mold license number before hiring.
Do not disturb the mold — touching or cleaning it spreads spores to unaffected areas. Do not run fans or the HVAC system in the affected area, as this also spreads spores. Close off the room if possible. Call Philip White at (407) 860-5846 for a professional inspection. If you or family members are experiencing respiratory symptoms, headaches, or fatigue that may be mold-related, consult a doctor as well. Take photos of visible mold for your insurance claim documentation.
Black mold (Stachybotrys chartarum) is a toxic mold species that produces mycotoxins compounds that can cause serious health effects. Symptoms of black mold exposure include chronic coughing, respiratory difficulty, headaches, fatigue, skin irritation, and in severe or prolonged cases, neurological symptoms. Children, the elderly, and people with compromised immune systems or asthma are particularly vulnerable. If you see dark greenish-black mold growth in your Orlando home especially following water damage, call us immediately. Do not attempt to clean or remove black mold yourself.
It depends on the cause of the mold. Most standard homeowners insurance policies in Florida cover mold remediation when it resulted from a sudden, accidental covered event such as a burst pipe, appliance failure, or roof leak. Mold from long-term humidity, neglected leaks, or flood water (without a separate flood policy) is typically not covered. We review your specific situation, document the mold and its cause, and help you work through the claim process. Call us and we will tell you honestly whether your situation is likely to be covered before any work begins.
Mold can return if the underlying moisture source is not fixed. This is the most common reason mold comes back after remediation the water intrusion, plumbing leak, ventilation issue, or humidity problem that caused the mold was never addressed. At Philip White, we do not just remove mold, we identify and address the moisture source as part of every remediation job. We also conduct post-remediation air quality verification and provide a clearance report. If you follow our recommendations for moisture control, properly remediated mold should not return.
